This customized Minimize palladium window was retro healthy with Non-Adhesive Smart Tint and simply installed using 3m double sided clear VHB tape within the perimeter of the glass. The client sent us a template and we Slice to match prewired and shipped a able to install kit.
Step 5: just before installation you should measure the air particulates in the area. We do offer you an air particulate meter to ensure the dust degrees are very low throughout installation. shouldn't be better than PM2.five.
three. We provide an installation tool nonetheless You may as well utilize a rubber roller to help during the installation. each and every installation is exclusive. to reduce imperfections remember to use patience and ensure there won't be any imperfections in the glass such as pits or scratches ahead of installing with This method.
The uses for electric powered glass are only confined by your creativity. We produced our privateness on Demand™ seal to indicate that that has a flip of the change, our switchable glass offers privateness immediately.
We advocate the outer dimensions in the film be 1/eight" shorter than the glass about all edges when retrofitting on an present glass floor which has a border or frame. This will permit the engineering to sit down flush around the glass offering the very best overall performance and keep away from any needless trimming in the field. this could also allow for tolerance to your wire management to regulate the film within the electrical connections. Any obvious gaps round the edges might be sealed Together with the advised acid free of charge neutral overcome silicone just for a concluded product or service. For frame fewer glass programs that may have a but glazed edges you could measure from beveled edge to beveled edge.
preserve the film dry: Self-adhesive PDLC film must be saved dry all the time. If h2o or any liquid spills about the film, clear it quickly that has a dry cloth to stop any injury.
the place latex useful source gloves to get rid of finger print oils from touching the glass and almost every other foreign darbree.
stay away from implementing stress to your film: Do not apply any pressure into the film as This may hurt the film or trigger delamination. When cleaning the film, use a gentle touch and avoid pressing also tricky.
Dry installation method: Installing adhesive PDLC film can be a dry method. hardly ever use drinking water; as a substitute, use 99% isopropyl Liquor (industrial Alcoholic beverages) to wash glass surfaces. will not work until finally the glass surface is a hundred% dry!
-eliminate the protective coating within the contact facet of the fabric previous to installation from the Non-Adhesive film and cleanse the particular Smart Tint along with the glass with 99% isopropyl Alcoholic beverages only.
Custom cut palladium window retro fit with Non-Adhesive Smart Tint simply installed utilizing 3m double sided apparent tape around the perimeter of the glass. The shopper sent us a template and we Reduce to match, prewired, and shipped a wanting to install package.
we've been the one business registered with the United States Patent and Trademark Business office. All of our Smart products and solutions are manufactured here in America, allowing us to offer you our industry main 5 calendar year guarantee, quickest transform-all around situations and almost no production restrictions.
safe the world: Cordon from the installation place to stop interference and maintain a managed ecosystem.
The self-adhesive comes with an adhesive layer for straightforward application, while the non-adhesive film demands a different adhesive to affix it for the area.